ReSound UP977-DLW Spécifications télécharger pdf (Page 24)

2.12.5.11 Engine starting contacts to provide for generator

starting from each unit independent of the other.

2.12.5.12 One (1) auxiliary S.P.D.T. contact on emergency

breaker and one (1) S.P.D.T. auxiliary contact on

normal breaker.

2.12.5.13 Plant exerciser to start and run the generator set with

or without load (in-field switchable) each of 168 hours

for a 30 minute interval.

2.12.5.14 Four (4) position mode selector switch marked “test”,

“auto”, “off”, and “engine start:.

2.12.5.15 Equipment grounding lug.

2.12.5.16 Cable connection lugs, cu/al type for all conductors.

2.12.5.17 A fully-rated overlapped neutral (make-before-break

rocker-blade-type) fourth pole in all switches

specified.

3.0 EXECUTION

3.1 SERVICES

3.1.1 Furnish the services of a competent and experienced

Manufacturer’s field service technician who has complete

knowledge of proper operation and maintenance of the equipment

for a period of not less than two (2) days in two separate visits to

inspect the installed equipment, supervise the initial test run, and to

provide instructions to the maintenance personnel. The first visit

will be for checking and inspecting the equipment after it is

installed.

3.1.2 At least one (1) of the two (2) days shall be allocated solely to the

instruction of maintenance personnel in operation and maintenance

of the equipment. This instruction period shall be scheduled at

least ten days in advance with the OWNER and shall take place

during start-up and acceptance by the OWNER.

3.1.3 Three final copies of operation and maintenance manuals specified

must be delivered to the ENGINEER prior too scheduling the

instruction period with the OWNER.

DIESEL ENGINE DRIVEN GENERATOR WITH WEATHERPROOF ENCLOSURE 472-23

1 2 ... 19 20 21 22 23 24 25 26

Pas de commentaire

ReSound UP977-DLW Spécifications Page 24