ReSound Mini-Canal Guide de l'utilisateur télécharger pdf (Page 16)

Replacing wax ﬁlters

Custom hearing instruments may have wax ﬁlters that protect against wax and moisture. It is

recommended that these are changed as needed.

To change these ﬁlters, the following steps are needed:

1. Brush the sound outlet area with the sound outlet pointed down.

2. Insert the threaded end of the wax ﬁlter tool into the used wax ﬁlter, and gently rotate clock-

wise.

3. Gently pull until the used ﬁlter is removed.

4. Discard the used ﬁlter in the slot located in the wax ﬁlter kit by pressing it into the center, slid-

ing it to one end of the slot, and pull until the ﬁlter is discarded.

5. Flip the wax ﬁlter tool around, locate a new ﬁlter in the dial, and press the tip of the tool into

the center of the dial.

6. Gently pull the new ﬁlter out of the dial.

7. Align the new ﬁlter to the sound outlet.

8. Press the new ﬁlter into the opening, and simultaneously pull and rock back and forth until

the new wax ﬁlter is in place.

Tip: Pressing on the new ﬁlter with the ﬂat side of the wax ﬁlter tool can give extra insurance that

the ﬁlter is correctly in place.

Note: If a different type of wax ﬁlter is used for your hearing instruments, or if your hearing instru-

ments do not utilise wax ﬁlters, consult your hearing care professional for proper instruction.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Pas de commentaire

ReSound Mini-Canal Guide de l'utilisateur Page 16